Professional Triple Sensor Pin less Moisture Meter (LES- HYDRO-PRO):
| Measuring range: | Wood: 2.0 ~ 65.0%
Gypsum: 0.1 ~ 35.0% Screed (Cement-Sand): 0.1 ~ 35.0% Concrete (Density dependant): 0.1 – 35.0% |
| Density range: | Wood: 420 – 700 kg/m3
Gypsum: 1400 kg/m3 Screed (Cement-Sand): 1700 kg/m3 Concrete: 1800 – 2400 kg/m3 |
| Scanning depth: | Rear sensor low range 15mm
Rear sensor high range 30mm Front sensor 20~50mm (Density dependant) |
| Timber groups: | 1 – 8 |
| Concrete groups: | 1 – 4 |
| Measuring modes: | Single or Average (5 readings) with Min/Max |
| Memory: | 50 Readings |
| Temperature range: | -10ºC to +60ºC |
| Operating temperature: | +5ºC to +40ºC |
| Power supply: | 3 x AAA 1.2V 800mAh rechargeable |
| Auto power off: | Selectable – Off, 3min, 5min, 10min, 15min |
| Dimensions and weight: | 150 x 59 x 28 mm / 170g |
| Optional: | External probe for air measurements:
Relative Humidity, Temperature, Dew Point and EMC (equilibrium moisture content) |
Basic Single Sensor Pin less Moisture Meter (LES-HYDRO-TEC):
| Measuring range: | Wood: 2.0 ~ 65.0%
Concrete (Density dependant): 0.1 ~ 35.0% |
| Density range: | Wood: 420 – 700 kg/m3
Concrete: 1800 – 2400 kg/m3 |
| Scanning depth:
(Rear sensor) |
Wood: 20 mm
Concrete: 10 mm |
| Resolution: | 0.1% humidity; 1ºC/ºF |
| Timber groups: | 1 – 8 |
| Concrete groups: | 1 – 4 |
| Temperature range: | -10ºC to +60ºC |
| Operating temperature: | 0ºC to +40ºC |
| Power supply: | 2 x 1.5V AAA Alkaline batteries
Approx. 10 hours use |
| Auto shut off function: | After approx. 1 minute |
| Dimensions and weight: | 110 x 43 x 25 mm / 75g |
Specifications:
| Model | LES-HYDRO-TEC | LES-HYDRO-PRO |
| Measuring range: | Wood: 2.0-65.0% MC
Concrete (Density dependant): 0.1-35% MC |
Wood: 2.0-65.0%MC
Gypsum: 0.1-35.0%MC Screed (Cement-sand): 0.1-35.0%MC Concrete (density dependant): 0.1-35.0%MC |
| Density range: | Wood: 420-700kg/m³
Concrete: 1800-2400kg/m³ |
Wood: 420-700kg/m³
Gypsum: 1400kg/m³ Screed (Cement-sand): 1700kg/m³ Concrete (density dependant): 1800-2400kg/m³ |
| Scanning depth: | Rear sensor only
Wood: 20mm Concrete: 10mm |
Rear sensor low range: 15mm
Rear sensor high range: 30mm Front sensor: 20-50mm (Density dependant) |
| Accuracy: (%MC Range dependant) | Wood: ±1% to ±2.5%
Concrete: ±0.9% to ±1.5% |
Wood: ±1.5% to ±3%
Concrete: ±0.9% to ±1.5% |
| Timber groups: |
1-8 |
|
| Construction Groups: | 1-4 | 1-6 |
| Measuring Modes: | Single | Single or average (5 readings) with Min/Max |
| Zero calibration: |
Yes, set initial sensor reading to zero and compensate for errors (e.g. Temperature changes) |
|
| Memory: | None | 50 Readings |
| Temperature Range: | -10℃ to +60℃ | With optional Probe |
| Operating Temperature: | +5℃ to +40℃ | +5℃ to +40℃ |
| Power Supply: | 2x 1.5 AAA alkaline batteries | 3 x AAA 1.2V 800mAh rechargeable |
| Auto-Power off | After Approx. 1 Minute | Selectable- off, 3Min, 5Min, 10Min, 15Min |
| Dimensions & Weight | 110 x 43 x 25mm /75g | 150 x 59 x 28mm / 170g |
| Accessories: | Carry pouch, strap, Batteries & manual | Carry pouch, strap, Batteries, Charger & manual |
| Optional: | None | External probe for air measurement: Relative humidity, temperature, Dew Point and EMC (equilibrium moisture content) |
Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
