Proud Distributors of GUNT Hamburg, UTEST, FOUR E’s Scientific & LABTECH ITALY

Rotary Sample Divider to EN932-1 (LAG023)

Rotary Sample Divider to EN932-1 (LAG023)

Complete with 8-outlet aluminium dividing head and 10 wide-mouth 250ml sample bottles.

Code LAG023
Other Standards EN932-1
Tariff 902480 90
  • Rotating dividers ensure the representativeness of a sample and thus the re-producibility of the analysis.
  • The LAG023 sample divider divides the sample so exactly that the composition of each fraction of the sample corresponds exactly to that of the original bulk sample.
  • This applies both for fine-powdered and coarse materials.
  • The material feed and dividing processes take place automatically, without interruption and without loss of material.
  • The LAG023 has a modular design and can be put together to suit individual requirements.
  • It offers an extremely flexible range of possible applications.
  • A feeder, various dividing heads, sample receptacle vessels and further useful accessories are available in addition to the drive unit.
  • The LAG023 is supplied as a complete unit, including a dividing head with 8 quick-release outlets, vibratory feeder and 10 x 250 ml sample bottles.

Features:

  • high division accuracy to suit modern analytical devices
  • modular design
  • automatic material feed via synchronized feeder
  • quick-release clamping system for simple and rapid handling of sample bottles
  • digital time setting
  • speed is monitored and kept constant
  • wide range of accessories including various dividing heads, collection and feeding systems
  • compact, easy to clean

Principle of Operation:

  • The material to be divided first flows through a feed hopper – which is located off-centre – directly into the openings of the dividing head.
  • This procedure results in very small, and therefore negligible, deviations between the part samples in the sample bottles, even with coarse materials.
  • The dividing process itself runs automatically and tamper-proof.
  • The speed-controlled dividing head rotates at a constant 110 revolutions per minute, independent of the load and the mains frequency.
  • This means that when using a dividing head with ten outlets, the feed flow is divided into 1100 individual samples each minute, thus providing optimum dividing accuracy.
  • The dividing heads divide the material evenly among the sample bottles which are available in various sizes.

Specification:

Applications sample division, sample reduction
Feed material bulk materials
Number of divisions 8
Timer 1 – 60 min or continuous
Feed size up to 10mm
Feed capacity 2000ml as supplied
Container volume 250ml
Rotary speed 110 rpm at 50/60Hz (± 3 min-1)
Time setting digital, 1, 3, 5, 10 – 60 min / continuous operation
Electrical supply 100-240V 50/60Hz 1ph
W x H x D 580 x 910 x 420 mm (incl. vibratory feeder)
Net weight 33.5kg (incl. vibratory feeder)
  • Additional accessories are available to increase/decrease the capacity & number of outlets if required.

Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.