AUTOMATIC Compression Testing Machines

Product Code:

Description:

• UTC-4713G.FPR, UTC-4723G.FPR, UTC-4733G.FPR, UTC-4727G.FPR and UTC-4737G.FPR model Automatic Compression Testing Machines are manufactured for compression testing of cubes and cylinders by taking into account user requests for general purposes.
• UTC-4727.FPR ve UTC-4737.FPR model products are designed for compressive-strength testing of larger size specimens.
• These machines also meet the requirements of CE norms with respect to the health and safety of the operator.
• The machines allow inexperienced operators to perform the test.
• Once the machine has been switched on and the specimen is positioned and centred by the help of concentric centring line/s of lower bearing block the only required operations are:
• Setting test parameters, including pace rate (only required when the specimen type is changed).
• Pressing the START button on the control unit.
• The machine automatically starts the rapid approach, when the specimen touches the upper platen the rapid approach is ended and starts loading at the pace rate that selected by user and stops once the specimen fails.
• Automatically saves the test parameters and test results.
• UTC-4682 Pedestal that is made of steel to facilitate the user’s placement of specimens in the frames for compression test should be ordered separately.
• The Machines consist of a welded steel frame (see table), hydraulic power pack with U-Touch PRO Control Unit.

Main Features:

• Pace Rate control between 1 kN to 25 kN
• Load Accuracy Class 1 acc. to EN 12390-4 and acc. to E74 starting from with the 5% of the machine capacity (Special calibration option starting from 1% of the full range with UTC-0210)
• Tests automatically with closed loop control
• The tests can be performed by controlling the machine either on U-Touch PRO control unit (UTC-4930.FPR) or on a computer with using free UTEST Software (USOFT-4830.FPR) which is provided free of charge with the machines.
• Load measurement with a pressure transducer
• Hydraulic pump with dual stage for rapid approach
• Welded steel walled frame with a single acting piston
• Piston return at the end of test automatically

Safety Features:

• Maximum pressure valves to avoid machine overloading
• Limit switch for piston stroke
• Emergency stop button
• Removable transparent front and rear safety doors
• Software controlled maximum load value

U-Touch PRO Control Unit:

• U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonry units/blocks by controlling the Utest automatic compression / flexure testing machines.
• All the operations of U-Touch PRO are controlled from the front panel touch screen display.
• U-Touch PRO Control Unit has easy to use menu options.
• It displays all menu option listings simultaneously, allowing the operator to access the required option in a seamless manner to activate the option or enter a numeric value to set the test parameters.
• Digital graphic display is able to draw real-time “Load vs. Time”, or “Stress vs. Time” graphics

UTEST Software for Automatic Compression / Flexure Testing Machines:

• UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonry units/blocks by controlling the Utest automatic compression / flexure testing machines.
• The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the USOFT-4930.FPR (The UTEST Software for Automatic Compression / Flexure Testing Machines with UTC-4830FPR Hydraulic Power Pack) pages.

Optional Additional Frame:

• For compression and especially flexural testing, additionally second testing frame should be ordered separately.
• In this case, the machines provide load control of two separate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel and additional selector valve.

GENERAL PURPOSE AUTOMATIC COMPRESSION TESTING MACHINES WITH Ø216mm FOR CUBES AND CYLINDERS
Models	UTC-4713G.FPR		UTC-4723G.FPR		UTC-4733G.FPR
Product Photo
Capacity	1500 kN		2000 kN		3000 kN
Frame Type	Welded Steel		Welded Steel		Welded Steel
Lower Bearing Block, Dimensions (D)	Ø 216 mm		Ø 216 mm		Ø 216 mm
Upper Bearing Block, (With Spherically Seating Assembly) Dimensions (C)	Ø 216 mm		Ø 216 mm		Ø 216 mm
Surface Hardness of Bearing Blocks	55 HRC		55 HRC		55 HRC
Flatness Tolerance	0,05 mm		0,05 mm		0,05 mm
Piston Diameter	230 mm		250 mm		310 mm
Piston Stroke	50 mm		50 mm		50 mm
Maximum Vertical Clearance Between Bearing Blocks (E)	380 mm		380 mm		380 mm
Horizontal Clearance (B)	320 mm		360 mm		415 mm
For Cylinder Specimens Sizes (up to)	Ø160×320 mm		Ø160×320 mm		Ø160×320 mm
For Cubes Specimens Sizes (up to)	150 mm		200 mm (**)		200 mm (**)
Power	550 W		550 W		550 W
Oil Capacity	20 L		20 L		20 L
Maximum Working Pressure	370 Bar		410 Bar		410 Bar
Dimensions (wxlxh) (Axd*xF)	750x451x1104 mm		790x453x1144 mm		845x497x1204 mm
Weight	625 kg		715 kg		935 kg
Pedestal (Optional)	UTC-4680		UTC-4682		UTC-4682
(d*) depth (**) Limited by capacity of the frame  The frames are supplied complete with: • 100 mm, 50 mm and 2 pcs. 30 mm x Ø165 mm distance pieces • Removable transparent front and rear safety doors
GENERAL PURPOSE AUTOMATIC COMPRESSION TESTING MACHINES WITH Ø300 mm FOR CUBES AND CYLINDERS
Models		UTC-4727G.FPR		UTC-4737G.FPR
Product Photo
Capacity		2000 kN		3000 kN
Frame Type		Welded Steel		Welded Steel
Lower Bearing Block, Dimensions (D)		Ø300 mm		Ø300 mm
Upper Bearing Block, (With Spherically Seating Assembly) Dimensions (C)		Ø300 mm		Ø300 mm
Surface Hardness of Bearing Blocks		55 HRC		55 HRC
Flatness Tolerance		0,05 mm		0,05 mm
Piston Diameter		250 mm		310 mm
Piston Stroke		50 mm		50 mm
Maximum Vertical Clearance Between Bearing Blocks (E)		350 mm		350 mm
Horizontal Clearance (B)		360 mm		415 mm
For Cylinder Specimens Sizes (up to)		Ø160×320 mm		Ø160×320 mm
For Cubes Specimens Sizes (up to)		200 mm (**)		200 mm (**)
Power		550 W		550 W
Oil Capacity		20 L		20 L
Maximum Working Pressure		410 Bar		410 Bar
Dimensions (wxlxh) (Axd*xF)		790x453x114 mm		845x497x1204 mm
Weight		750 kg		975 kg
Pedestal (Optional)		UTC-4682		UTC-4682
(d*) depth       (**) Limited by capacity of the frame  The machines are supplied complete with: • 100 mm, 50 mm and 30 mm x Ø205 mm distance pieces • Removable transparent front and rear safety doors

Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.