Product Codes:

UTM-8400    Cold Test Bending System, 150 kN

Description:

• UTM-8400 Cold Bending Machine is used for bending and re-bending tests of reinforcing bars, wire rod and wire for concrete in accordance with the requirements of EN ISO 15630-1.
• The test piece is bent over a mandrel. The angle of bend and the diameter of the mandrel (D) is selected in accordance with the relevant product standard EN 10080.
• The bend test is performed with a minimum angle of bend of 180° over a mandrel, According to EN ISO 15630-1.
• For re-bend test, first the test piece is bend with a minimum angle of bend of 90° over a mandrel, in a second step, the aging treatment is applied and then the test pieces bent back up to a minimum of 20°, according to EN ISO 15630-1,
• After the tests, the tension (lower) side of the test piece is visually inspected for cracks or fissure visible to a person with normal or corrected vision.
• The test piece is inspected for cracks and fissures visible to a person with normal or corrected vision.
• Mandrels for bent and re-bend tests  should be ordered separately.

Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.