Design and Testing of Bituminous Mixtures
| Code | UTAS-2130 |
| Standards | TS EN 12697-20 |
Product Codes:
| UTAS-2130 | Automatic Asphalt Indentation Penetrometer, EN |
| UTAS-2134 | Spare Indenter Pins (100mm2 and 500 mm2) for UTAS-2130 |
| UTAS-2135 | Adjustable mould for the test cube (69mm) for UTAS-2130 |
| UTAS-2136 | Metal Intermediate Plate for UTAS-2130 |
| UTAS-2137 | Calibration Block for UTAS-2130 |
| UTAS-2138 | The apparatus for preparing the test cubes for UTAS-2130 |
| UTCM-0926 | Cube Mould 70.7 mm, BS, steel, for UTCM-0930 and UTAS-2130 |
| Models for 220-240V 50-60 Hz, 1 ph. | UTC-2130 |
| Models for 110-120V 60 Hz, 1 ph. | UTC-2130-N |
Description:
- UTAS-2130 Automatic Indentation Penetrometer determines the resistance of an asphalt cube and cylindrical specimens to indentation when force is applied to them using a cylindrical pin in a defined period.
- Maximum nominal size of the aggregates should be less or equal to 16 mm.
- UTAS-2130 can apply a 25 N preliminary force and then 525 N total force without touching the test weights with electromechanical method acc. to TS EN 12697-20.
- UTAS-2130 consists of a four-columns frame combined with an assembly for force application and a stainless steel 25L water bath with drain facility, a digital control unit with immersion type heater-agitator, 50 x 0.01 mm displacement transducer with holder, calibration block, interchangeable indenter pin with 100 mm2 and 500 mm2, an adjustable mould 69mm, a metal intermediate plate and a free software.
- Cube mould and the apparatus for preparing the test cubes should be ordered separately.
Key Features:
- Stainless steel
- Temperature control
- Digital indicator
- Ethernet connection
Software:
- UTAS-2130 is supplied with software developed by Utest that allows automatic capture to PC of test data.
- Software is capable of showing the test data in real time, storing the results and real time temperature monitoring.
Technical Specification:
| Preliminary Force | (25 ± 1) N |
| Total Test Force | (525 ± 1) N |
| 100 mm2 Diameter Indenter Pin | (11.3 ± 0,1) mm |
| 500 mm2 Diameter Indenter Pin | (25.2 ± 0,1) mm |
| Deformation of Apparatus Upon Application and Removal of Forces | <0.01 mm |
| Water Tank Capacity | 25 litres |
| Water Temperature Range | Ambient to the test temperatures |
| Water Temperature Stability | Accuracy of ± 1 °C. |
| Digital Indicator Resolution | 0.01 mm |
| Dimensions | 590x485x1040 mm |
| Weight (approx.) | 200 kg |
Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
